ASV PT-70, Руководство по обслуживанию

Страница: 94 / 146

3. Clean the threads on the turnbuckle thoroughly
using a stiff bristle brush.
4. Loosen the lock nut on the turnbuckle and spin it
to the end of the threaded shaft to allow clearance
when the drive table is lowered. (fig. 13-2)
5. Rotate the turnbuckle and lower the drive table as
far as it will go. (fig. 13-3)
6. Remove the bolts securing the outer wheel to
the hub. Then remove the wheel. (fig. 13-4, 13-5)
7. Remove the outer scraper plate from the suspen-
sion rail. (fig. 13-6)
8. Remove the bolts securing the inner wheel to the
hub, then remove the wheel. (fig. 13-7, 13-8)
9. Repeat this procedure as necessary to remove the
15” idler wheels throughout the undercarriage.
Note: To remove the 10” bogie wheels on the PT-80
undercarriages, refer to page 13-3 of this manual.
Installation
1. To install the 15” idler wheels, reverse the removal
procedure. Torque the wheel mounting bolts
upon installation to 90 +/- 10 Lb. Ft.
13-2
Rubber Track Loader
13. Undercarriage
13-2
13-3
13-4
13-5
13-6
13-7
13-8