ASTRO ATS-9800, Руководство оператора

Страница: 9 / 36

SECTION 2
ASSEMBLY
9
SECTION 2
–
ASSEMBLY
Stand-Alone Mode
Note: This process assumes you are using the system as a "stand-alone" Tabber.
1. Attach the Rear Paper Support using the two thumbscrews and washers provided.
The finger (
on bottom edge of Paper
Support
) must be inserted into one of the
locator holes in the Tabber frame. Secure
Paper Support to the frame with the
thumbscrews, as shown.
When double tabbing: Set the Paper
Support to the far left locator hole. This
centers the Paper Support on the Tabber.
When single tabbing: Paper Support can
be positioned in any of the other locator
holes. Try to position the Paper Support so
it is centered on the media you are feeding.
2. Install the Paper Support Rest onto the Rear
Paper Support, using the thumbscrew and
washer supplied.
Two Paper Support Rests are included:
Narrow
rest is for media 6.25" wide or less.
Standard (
wider
) wedge is for all other media.
3. Attach both Media Side Guides to the unit as
shown. The bottom of the Media Side Guide fits
into the brass bushing on the shaft, as shown.
The Guides are secured to the mounting blocks
using the two Phillips head screws, supplied.