ASTRO ATS-9800, Руководство оператора

Страница: 23 / 36

SECTION 3
OPERATING THE TABBER
23
Setting Up the Feed System
Sheet Separation Adjustment
This procedure is used to insure that only one piece of media is fed at a time.
1. Move the Media Side Guides so that all of the Sheet Separators
are accessible.
2. Loosen the locking screw and raise the Separator. Tighten the locking
screw to hold the Separator in the raised position.
Repeat this step for all
four (4) Separators.
3. Place a single piece of media under the
Separators. The media should be
positioned at the approximate location
that you plan to feed the media through
the Tabber.
On the Separators that have media
beneath them; loosen the separator
locking screws just enough to allow the
Separators to drop freely against the
media. Then tighten the locking screws.
CAUTION
Be sure that unused Separators are locked in their raised position. If
not, they will rub on the Feed Rollers, causing transport problems
and damage to the Rollers and Separators
.