ASTRO ATS-9800, Руководство оператора

Страница: 2 / 36

SAFETY PRECAUTIONS
THIS EQUIPMENT PRESENTS NO PROBLEM WHEN USED PROPERLY.
OBSERVE THE FOLLOWING SAFETY RULES WHEN OPERATING THE
ASTRO ATS-9800 TABBER.
BEFORE USING THE ATS-9800, YOU SHOULD READ THIS MANUAL
CAREFULLY AND FOLLOW THE RECOMMENDED PROCEDURES,
SAFETY WARNINGS, AND INSTRUCTIONS:
9
Keep hands, hair, and clothing clear of rollers and other moving parts.
9
Avoid touching moving parts or materials while the machine is in use. Before clearing a jam, be
sure machine mechanisms come to a stop.
9
Always turn off the machine before making adjustments, cleaning the machine, or performing
any maintenance covered in this manual.
9
Use the power cord supplied with the machine. Plug it into a properly grounded, easily
accessible wall outlet located near the machine. Failure to properly ground the machine can
result in severe personal injury and/or fire.
9
The power cord and wall plug is the primary means of disconnecting the machine from the
power supply.
9
DO NOT use an adapter plug on the line cord or wall outlet.
9
DO NOT remove the ground pin from the line cord.
9
DO NOT route the power cord over sharp edges or trap it between furniture.
9
Avoid using wall outlets controlled by wall switches, or shared with other equipment.
9
Make sure there is no strain on the power cord caused by jamming between equipment, walls or
furniture.
9
DO NOT remove covers. Covers enclose hazardous parts that should be accessed by a
qualified service representative. Report any cover damage to your service
representative.
9
This machine requires periodic maintenance. Contact your authorized service
representative for required service schedules.
9
To prevent overheating, do not cover the vent openings.
9
Use this equipment only for its intended purpose.
In addition, please follow any specific occupational safety and health standards for your workplace or area.
This manual is intended solely for the use and information of Astro Machine Corp., its designated
agents, customers, and their employees. The information in this guide was obtained from several
different sources that are deemed reliable by industry standards. To the best of our knowledge, that
information is accurate in all respects. However, neither Astro Machine Corp. nor any of its agents
or employees shall be responsible for any inaccuracies contained herein.
All trademarks are the property of their respective holders.
All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or any information storage and retrieval system, without permission in writing
from Astro Machine Corp.