ASTRO ATS-9800, Руководство оператора

Страница: 20 / 36

SECTION 3
OPERATING THE TABBER
20
12.
Using the Peel Bar Locators, slide the Peel
Bar down to its
"run position" . It should
lock into position.
IMPORTANT! When the Peel Bar is in the
lower position (
run position
); the red dots at
the inside edges of the Tab Drive Assembly,
should align with the space
between two
tabs. Verify that this alignment is correct
before you continue.
13.
If only placing one tab onto the media,
tab loading/threading process is finished.
To place two tabs onto the media :
Repeat this process, beginning from Step 3 ,
to load/thread a second row of tab stock into
the Tabber.
See the "Tab Stock Threading
Diagrams" for additional help.
14.
Proceed to "Setting Up the Feed System" .