ASTRO ATS-309, Руководство оператора

Страница: 62 / 100

PROGRAMMING THE TABBER
58
17. Software returns to
“
Select option to edit
”
screen. From here you can press RUN on
Control Panel, run a sample and check for proper placement of stamp. If adjustments are
required, see
“
Fine Tuning Adjustments
”
at end of this Section.
Placing Multiple Stamps
1. To place multiple (
2 or more
) stamps
on a piece, first select
Tab/Stamp
from
“
Select options to edit
”
screen, (
Step
10
) above. Then
“
Press 1, 2 or 3 for
the number of tabs/stamps
”
screen
appears. Select
2
.
2. When you do,
“
Choose tab placement
type:
”
screen appears. For stamps,
choose
Together
. This causes Tabber
to place stamps next to each other with
only the space between stamps
separating them. Once this is done,
“
Select Option to exit, or
”
screen
reappears. Select
Position
and continue
with set up from Step 13 above.
Placing Multiple Tabs Manually
When placing multiple Tabs, select
Separate
in Step 2 above. Then set position of each tab
separately using
“
Select Tab offset to edit
”
and
“
Enter offset for Tab n
”
screens and press
SAVE key screen for each tab position.