background image

Asentria SiteBoss 530 User Manual 

 

  
 

131

 

 
Internal Modem Guidelines 

 
The internal modem supplied with this product complies with Part 68 of the FCC Rules and Regulations.  The 
labeling on the modem provides the FCC Registration number and the Ringer Equivalence Number (REN) for the 
modem.  This information is also listed below.  You must provide, upon request, this information to your telephone 
company. 
 
The REN is useful to determine the quantity of devices you may connect to a telephone line and still have all of 
these devices ring when the number is called.  In most, but not all areas, the sum of the RENs of all devices 
connected to one line should not exceed five (5.0).  To be certain of the number of devices you may connect to a 
line, as determined by the REN, you should contact the local telephone company to determine the maximum REN 
for your calling area. 
 
If the modem causes harm to the telephone network, the telephone company may temporarily discontinue your 
service.  If possible, they will notify you in advance.  If advance notification is not possible, you will be notified as 
soon as possible. 
 
Your telephone company may make changes in its facilities, equipment, operations or procedures that could 
affect proper functioning of your equipment.  If they do, you will be notified in advance to give you an opportunity 
to maintain uninterrupted telephone service. 
 
If you experience trouble with the modem, contact Asentria at (206) 344-8800 for information on obtaining service 
or repairs.  The telephone company may ask you to disconnect the device from the network until the problem has 
been corrected or until you are sure that the device is not malfunctioning. 
 
This device may not be used on coin service lines provided by the telephone company (this does not apply to 
private coin telephone applications which use standard lines).  Connection to party lines is subject to state tariffs. 
 

Modem

 

FCC ID

 

REN

 

2400 Baud Modem 

EUD-5U9-BRI4480 

0.8B 

33.6K Baud Radicomm Modem 

406CHN-31735-PT-E REN 1.1B 

1.1B 

33.6K Baud OmniModem 

6KMUSA-34184-MME REN 0.9B 

0.9B 

33.6K Baud MultiModem 

AU7-USA-46014-MD-E  

0.1B 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание SiteBoss 530













































































































































Отзывы: