ASCOM Ascotel 2025, Системное руководство

Страница: 740 / 1141

ascom Ascotel 2025/2045/2065
HBT_20321104_03/B0_en Planning a Private Network 3.109
6.2 Example of Networking
A small network will be used to describe a planning procedure. The system des-
ignation always precedes the systems so that the configurations of the various sys-
tems can be differentiated. For example, trunk group 5 of system 1 is designated
as trunk group 1-5.
The following assumptions are made:
• System 1 is connected with system 3 via a primary rate access.
• System 1 is connected with system 2 with two basic accesses.
• System 1 is connected with the public network via a primary rate access
(system 1 is the gateway system).
Steps in the procedure:
1. Create the routes (as of Page 3.110).
2. Create the trunk groups (as of Page 3.112).
3. Configure the routes (as of Page 3.113).
4. Create the numbering plan (as of Page 3.115).
5. Set up direct dialling in (as of Page 3.124).
Fig. 3.63: The specimen network
Port: external S
Trunk group 1-4
Trunk group 2-4
Port: T
PINX 2
(destination
of route 6)
haz0812aaena0
PINX 3
(destination
of route 7) PINX 1
(destination
of route 5)
Trunk
group 1-5
Port: T2
Trunk
group 1-1
Port: T2
Trunk
group 3-4
Port: T2