ASCOM Ascotel 2025, Системное руководство

Страница: 746 / 1141

ascom Ascotel 2025/2045/2065
HBT_20321104_03/B0_en Planning a Private Network 3.115
These properties are set in the configuration for the routes. Variant 1:
1. In system 1 select the settings for route 1-1:
– Numbering plan identifier (NPI) = E.164
– Digit barring = yes
2. In system 2 select the settings for route 2-1:
– Numbering plan identifier (NPI) = E.164
– Digit barring = yes
3. In system 3 select the settings for route 3-1:
– Numbering plan identifier (NPI) = E.164
– Digit barring = yes
Variant 2:
1. In system 1 select the settings for route 1-1:
– Numbering plan identifier (NPI) = E.164
– Digit barring = yes
2. In system 2 select the settings for route 2-1:
– Numbering plan identifier (NPI) = PNP
– Send access code = 0 (as the exchange access prefix)
– Digit barring = yes
3. In system 3 select the settings for route 3-1:
– Numbering plan identifier (NPI) = PNP
– Send access code = 0 (as the exchange access prefix)
– Digit barring = yes
6.2.4 Creating the Numbering Plan
Now that the network is defined through the definition of the routes and trunk
groups, we need to specify the numbering within the network.
In the following we shall be looking at both methods described on Page 3.102.