ASCOM Ascotel 2025, Системное руководство

Страница: 928 / 1141

ascom Ascotel 2025/2045/2065
HBT_20321104_05/B0_en Configuration Steps 5.29
5.4.2 Logging a Handset off the System
Select "Log subscriber on / off" under "Mobile: DECT" in the system configura-
tion.
"Select "Log Ascotel DECT subscriber off"; log-off procedure is initiated.
Tip:
The handset identification is deleted if the handset is located within the
coverage range of a radio unit; if not, it must be deleted manually on the
handset (see Handset Operating Instructions). The Ascotel DECT sub-
scriber number and the data is saved in the PBX (identified with an * in
the numbering plan).
5.4.3 Logging a Visitor Handset on and off
If a Ascotel DECTsubscriber is configured as a visitor, he can be logged on via
AIMS (Attendant authorization level) or the System Assistant on the Office 45 for
the duration of his visit.
The visitor’s destination should be ascertained at the same time so that he can be
logged on to the ideal PINX.
In addition to the procedure described above for logging a handset on and off,
you also need to specify the duration of the visit in the subscriber configuration.
It is advisable to enter the visitor's name.
One hour before the visiting time is due to expire, the system sends the following
message to an internal subscriber: "DECT SC No. will be logged off in one hour".
This subscriber is configurable.
When the visiting time expires, the handset is automatically logged off from the
system.