Artistic Licence Commissioner rdmx, Руководство пользователя

Страница: 26 / 47

26
Get the start address of the second device’s second sub -device
Use the LEFT, RIGHT, UP, DOWN keys to set the device to 002, shown
in green. This is the second sunDial.
Use the LEFT, RIGHT, UP, DOWN keys to set the sub-device to 002,
shown in blue. This means the second sub-device is being accessed.
The bottom three lines of the display update to report the settings. In
this product, sub-devices are used to access individual dimmer
channels. We can see this because the footprint has updated to 1.
Set the start address of the first root device
Use the LEFT, RIGHT, UP, DOWN keys to set the device to 001, shown
in green. This is the first sunDial.
Use the LEFT, RIGHT, UP, DOWN keys to set the sub-device to 000,
shown in blue. This means the root device is being accessed.
The bottom three lines of the display update to report that the device
is called ‘sunDial 1’ and has a start address of 001, a footprint of 4 and
a personality set to 1 from the 5 available.
Change the start address to the desired value (value 009 shown in
green) and press ENTER.
Commissioner will set the value and then immediately read back the
result so you can be sure it was accepted.
Resulting in this display.
Dv 002 - 002
sunDial 2
St 006 /1
Pr 001 /5
Dv 002 - 002
sunDial 2
St 006 /1
Pr 001 /5
Dv 001 - 000
sunDial 1
St 001 /4
Pr 001 /5
Dv 001 - 000
sunDial 1
St 001 /4
Pr 001 /5
Dv 001 - 000
sunDial 1
St 009 /4
Pr 001 /5
Dv 001 - 000
sunDial 1
St 009 /4
Pr 001 /5