21
LEFT
and
RIGHT
Select the required start address for the received DMX display. The display will
change to show the first and last channel displayed.
UP
and
DOWN
Select the required start address for the received DMX display. The display will
change to show the first and last channel displayed.
ENTER
Reset the minimum and maximum data (ellipsis will be displayed in each field).
FUNCT
Not used.
USER
3 second press to add or remove this menu from the shortcut list.
In the example below, the min and max fields have been reset and no flicker has been detected. The
current received level is 255:
In the example below, the level has changed to 253 and so the min
–
max range is now 253
–
255.
The current received level is 253:
In the example below, the current received level is 253, but the min
–
max range is now 000-255
showing that flicker has been captured:
The top line shows the DMX addresses that are displayed, along with the
The level displayed is from the received DMX of the start code defined in DMX-RECEIVE-STATUS.
When would I use this?
Flickering can be caused by many conditions, but the first step is always to check whether the
lighting console is actually outputting changing data on the channels that flickers. This function
allows any channel flicker to be captured.
Ch:
001
W
Now: 255
... - ...
Ch:
001
W
Now: 253
253 - 255
Ch:
001
W
Now: 253
000 - 255
Содержание Commissioner rdmx
