Artistic Licence Commissioner rdmx, Руководство пользователя

Страница: 35 / 47

35
RGB Each group of three channels in the selected range is treated as RGB and cycled though
primary and then secondary colour mixes.
RGBW Each group of four channels in the selected range is treated as RGBW and cycled through
primary and then secondary colour mixes.
To change the operating function either press the FUNCT key or select the Func field and use the UP
and DOWN keys.
When would I use this?
If you suspect that something in the DMX infrastructure (Splitter, merger, cable) is causing
interference with the data, this allows you to transmit a defined pattern while watching the output
from the suspect equipment.
DMX
– ADVANCED – FIX RX Menu
This function receives DMX512, strips out all non-zero start code packets, corrects timing errors,
corrects formatting known to upset some manufacturers’ products and retransmits it.
The display provides a mimic of the first 30 channels.
Keys operate as follows:
LEFT and RIGHT Not used.
UP and DOWN Not used.
ENTER Not used.
FUNCT Not used.
USER 3 second press to add or remove this menu from the shortcut list.
When would I use this?
If you suspect incompatibility between the lighting console and the fixtures, connect Commissioner
between them using this function. If the problem was solved
– you have your answer!
DMX – ADVANCED - NETWORK Menu
This function uses the DMX test packet to check for data loss in a DMX network. The output of
Commissioner should be connected to the primary input to your DMX network (i.e instead of the
lighting console or ethernet gateway output). The Commissioner input should be connected to the
output of the splitter you wish to test.
DMX test packets send maximum speed packets with a worst-case payload (alternating bit patterns
which are designed to trigger any potential transmission faults).
FIX Rx DMX
ƑƊƊƑƊƊƑƊƊƑƑ
ƑƊƑƑƑƊƑ
ƑƊƑƊƊƊƑƊƑƊƊ