Artistic Licence Commissioner rdmx, Руководство пользователя

Страница: 31 / 47

31
Commissioner will set the value and briefly display the response from
the device. This will either be an ACK which is good, or a NACK with
additional information that explains the reason that the device could
not accept the command.
Commissioner will the query the parameter in order to confirm the
current value.
Set the names of both devices
Setting text parameters can be laborious, but there is a trick that considerably speeds the process.
Let’s say you want to name the dimmers ‘Dim 1’ and ‘Dim 2’. Use broadcast to set all dimmers to
‘Dim ‘ and then edit each one to add the number:
Use the LEFT, RIGHT, UP, DOWN keys to set the device to ALL and the
sub-device to 000, shown in green. This addresses both sunDial.
Change the label to ‘Dim’ and press ENTER. Both dimmers are now
named ‘Dim’.
Change the device to 001, shown in green.
Add the ‘1’ to ‘Dim’, shown in green. Press ENTER. Commissioner will
briefly display the acknowledge from the device.
Change the device to 002, shown in green.
Dv 001 - 000
START ADDR
050
Enter = Go
Dv 001 - 000
START ADDR
050
-- ACK --
Dv ALL - 000
LABEL
Enter = Go
Dv ALL - 000
LABEL
Dim
Enter = Go
Dv 001 - 000
LABEL
Dim
Enter = Go
Dv 001 - 000
LABEL
Dim 1
-- ACK --
Dv 002 - 000
LABEL
Dim
Enter = Go