18
Zero start code DMX is being received.
RDM (Remote Device Management) is being received.
Zero start code DMX and RDM is being received.
Non-Zero start code DMX is being received.
DMX with errors is being received.
The remaining three display lines show a low-resolution bargraph of the levels of 30 consecutive
channels from the received DMX of the start code defined in DMX-RECEIVE-STATUS.
When would I use this?
If you need to see the big picture rather than exact detail on channels levels. Also good for checking
whether a lamp personality is operating as expected.
DMX
–
RECEIVE - DECIMAL Menu
The DMX-RECEIVE-DECIMAL menu is used to display a bargraph of the levels of up to 6 consecutive
channels.
Keys operate as follows:
LEFT
and
RIGHT
Select the required start address for the received DMX display. The display will
change to show the first and last channel displayed.
UP
and
DOWN
Select the required start address for the received DMX display. The display will
change to show the first and last channel displayed.
ENTER
Not used.
FUNCT
Not used.
USER
3 second press to add or remove this menu from the shortcut list.
The top line shows the DMX addresses that are displayed, along with the
The remaining three display lines show decimal (0-255) levels of 6 consecutive channels from the
received DMX of the start code defined in DMX-RECEIVE-STATUS.
001
-006
W
000 255
255 000
000 255
001-030
W
001-030
R
001-030
W
R
001-030
N
001-030
E
Содержание Commissioner rdmx
