manualshive.com logo in svg

Artesyn Embedded Technology SharpStreamer Mini PCIE-7205, Инструкция по установке и использованию

Поделиться
Скачать
Artesyn Embedded Technology SharpStreamer Mini PCIE-7205 Скачать руководство пользователя страница 69

BIOS

SharpStreamer™ Mini PCIE-7205 Installation and Use (6806800U01A)

69

Select 

Save and Exit

 after making a selection in the setup menus. This procedure stores the 

selections displayed in the menus in CMOS. At the time of next boot up, BIOS configures the 
system according to the setup selection stored in CMOS. For more details, refer to the section 

Exit Menu

 

on page 87

. CMOS is a generic term, which is used to refer to the storage device that 

stores BIOS configuration data.

In order to navigate setup, use the arrow keys on the keyboard to highlight items on the menu. 
All other navigation possibilities are shown at the bottom of the menu. Additionally, an item-
specific help is displayed on the right hand side of the menu window. It displays the help text 
for the currently selected field.

If you have performed any unwanted changes or not sure about configuration settings, restore 
the default values.

To restore default values, perform the following steps:

1. Press 

<F2

 on the keyboard to return to setup.

2. Press 

<F9

> to restore the system defaults.

Make sure that BIOS is properly configured prior to installing the operating system 
and its drivers.

If any changes are saved in the setup, the next time when the card boots, BIOS 
configures the system according to the setup selections stored. If those values 
cause the system boot to fail, reboot and enter setup to get the default values or 
to change the selections that caused the failure.

Содержание SharpStreamer Mini PCIE-7205















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды