Artesyn Embedded Technology SharpStreamer Mini PCIE-7205 Скачать руководство пользователя страница 36

Страница: 36 / 110

Hardware Preparation and Installation

SharpStreamer™ Mini PCIE-7205 Installation and Use (6806800U01A

)

2.4.1

PCIE-7205 Card Installation

To install the PCIE-7205 card, perform the following steps:

1. Use anti-static pads and attach an ESD strap to your wrist. Attach the other end of the ESD

strap to an electrical ground (For more details, refer to the section

Precautions

on page 32

2. Identify the system in which the PCIE-7205 card is to be installed.

3. Remove the system cover and ensure whether the host system has the required PCIe slot

(with a minimum x4 PCIe connector) to hold the card.

4. Insert the PCIE-7205 card into the PCIe slot, secure it, and ensure that the card is properly

fitted in the PCIe slot.

5. Lock the slot ejectors, close the system cover and then power on the system.

For detailed information about the PCIe card installation, refer to the respective rack-
mount server manufacturer’s product documentation.

Make sure that the card has enough air flow after closing the system with the cover.
Refer to respective rack-mount server manual for setting the fan speed accordingly.

The MCP transcoding performance is directly related to the airflow and cooling ability
of the server in which the card is installed.

Содержание SharpStreamer Mini PCIE-7205















































































































Результаты поиска

Содержание SharpStreamer Mini PCIE-7205

Отзывы:

Бренды по названию

Популярные бренды

Artesyn Embedded Technology SharpStreamer Mini PCIE-7205, Инструкция по установке и использованию

Результаты поиска

Содержание SharpStreamer Mini PCIE-7205

Отзывы:

Бренды по названию

Популярные бренды