manualshive.com logo in svg

Artesyn Embedded Technology SharpStreamer Mini PCIE-7205, Инструкция по установке и использованию

Поделиться
Скачать
Artesyn Embedded Technology SharpStreamer Mini PCIE-7205 Скачать руководство пользователя страница 29

Chapter 2

SharpStreamer™ Mini PCIE-7205 Installation and Use (6806800U01A)

29

Hardware Preparation and Installation

This chapter provides information on unpacking and inspecting the card procedure, safety 
precautions. The environmental, thermal, and power requirements, and the installation and 
removal procedures of the card are explained in this chapter.

2.1

Unpacking and Inspecting PCIE-7205 Card

Shipment Inspection

To inspect the shipment, perform the following steps:

1. Verify that you have received all items of your shipment:

One SharpStreamer™ Mini PCIE-7205 card.

One printed copy of 

Quick Start Guide.

One printed copy of 

Safety Notes Summary.

Any optional items ordered.

2. Check your shipment and report any damage or differences to the Contact Center 

at 

[email protected]

.

Damage of Circuits
Electrostatic discharge and incorrect installation and removal of the card can damage 
circuits or shorten their life.

Make sure that you are working in an ESD-safe environment, before touching the card 
or electronic components.

Содержание SharpStreamer Mini PCIE-7205















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды