manualshive.com logo in svg

Artesyn Embedded Technology SharpStreamer Mini PCIE-7205, Инструкция по установке и использованию

Поделиться
Скачать
Artesyn Embedded Technology SharpStreamer Mini PCIE-7205 Скачать руководство пользователя страница 30

Hardware Preparation and Installation

SharpStreamer™ Mini PCIE-7205 Installation and Use (6806800U01A

)

30

3. Remove the desiccant bag shipped with the card and dispose it according to your 

country’s legislation.

2.2

Environmental, Thermal, and Power 

Requirements

This section contains the environmental, thermal, and power requirements of the PCIE-7205 
card.

2.2.1

Environmental and Thermal Requirements

Make sure the card is thoroughly inspected before shipment. If any damage has occurred 
during transportation please contact our Contact Center immediately.

Operating temperatures refer to the temperature of the incoming air passing across 
the card and out of the faceplate and not the temperature of the components.

Card Damage
High humidity and condensation on the card surface causes short circuits.
Do not operate the card outside the specified environmental limits. Make sure that the 
card is completely dry and there is no moisture on its surface before applying power.

Содержание SharpStreamer Mini PCIE-7205















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды