ARRI ARRIMOTION, Руководство пользователя

Страница: 62 / 162

ARRIMOTION User’s Guide, 01/2004
Page 62 of 162
Recording Multitracks
• In the Play/Record screen, switch the Connect button on, and push the Record button. Move only
the pan this time, and not tilt or focus. Push Stop .
• Push the Axes tab to open the Axes screen. Here you set the behavior of the individual axes.
Auto If move data for this axis exists,
the axis will play back during the
next recording. If no data exists,
the axis will record.
Rec Any previously recorded data for
this axis will be discarded. New
data will be recorded.
Hold Move data will be retained, and
the axis will not move at all.
In our case, select the TILT axis and push the Mode button to switch its mode to Rec .
Note: The Rec option is only available when you have switched the playback behavior to
Multitrack . During Normal playback, all you get is Auto and Hold .
• Go back to the Play/Record screen. Turn Connect off. Push Move to Begin . Turn Connect back
on.
• Now push the Record button. The previously recorded pan movement will play back, but any
tilting you do will be recorded. Push Stop when you are done.
• When you stop recording a move, the ARRIMOTION will automatically set the tilt axis from Rec
to Auto , so you do not accidentally erase it.
• Open the Axes screen to set the next axis you want to record to Rec . If you did not like the tilt,
set it to Rec and record it again. If you liked it, set the FOCUS to Rec .
• Go back to the Play/Record screen, turn Connect off, push Move to Begin and turn Connect back
on. When you push Record , you will record the new axis while the old ones all play back.
Move Length
A multitrack move will be as long in duration as the axis with the longest duration. If a new axis you
record is longer than the previously recorded axes, the whole move will be made longer to include
the new axis. If a new axis is shorter, the move length will remain the same.
Hold
If you want an axis to not move at all, set it in the Axes screen to Hold . The Hold mode will not be
reset to Auto each time a record is made (like the Rec mode), but it will remain in Hold until you
change it.
Slow Play Back
For increased accuracy, it is possible to slow down the speed of the axes that are playing back.