manualshive.com logo in svg

ARRI ARRIMOTION, Руководство пользователя

Поделиться
Скачать
ARRI ARRIMOTION Скачать руководство пользователя страница 48

ARRIMOTION User’s Guide, 01/2004

 

 

Page 48 of 162 

3.5.  More on Recording and Playing Back Moves 

 

Danger

 

The system moves on its own when moving to begin, moving to end or playing back a 
move. Make sure that no humans or any other items obstruct the system and that all 
cables are neatly tucked away so they do not catch on anything! 

 

Danger

 

Playback of a move should be tested first at slow speeds.  

 

Danger

 

During playback the system can move with high speeds.  

 

The Counter/Status Field 

During record and play back the Status Field in the top left corner of the 

Play/Record

 screen will 

display a running counter. This counter is also a button: pushing it will switch from a time counter to 
a frames counter. During standby the move status will be displayed in this space: 
 
 
 
 
 
 
 
 
 
 
 
No Move 

No move data is stored in memory.  

Move Begin 

The system is at the beginning of the move.  

Move End 

The system is at the end of the move.  

Not on Move 

After a move is loaded, or if a move is stopped in mid move, the system will not be 
on the exact path of the move.  

Содержание ARRIMOTION



































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды