manualshive.com logo in svg

ARRI ARRIMOTION, Руководство пользователя

Поделиться
Скачать
ARRI ARRIMOTION Скачать руководство пользователя страница 34

ARRIMOTION User’s Guide, 01/2004

 

 

Page 34 of 162 

2.10. Home Axes 

 

 
Danger 

The system moves on its own when homing. Make sure that nothing obstructs the system 
and all cables are neatly tucked away so they do not catch on anything!  

 
Every time the ARRIMOTION system is powered up, all existing axes must be homed. Homing is a 
way to accurately establish the position of each motor.  
 
 
Axes Tab 
 
 
Axes Screen 
 
 
On/Home Button 
 
 
• Push 

the 

Axes

 tab to open the 

Axes

 screen. Select the first axis in the list, which should be 

PAN

.  

• Push 

the 

On/Home

 button once to turn the axis on. The axis 

State

 will change to 

?

. Push 

On/Home

 again to start homing. While homing the respective LED on the main controller will 

blink red/green.  

•  Now select the next item in the list, and again push 

On/Home

 twice. Go through the whole list 

using the same method. Tip: when homing the lens axes, you do not need to wait for one to finish 
before you start homing the next. They can home simultaneously.  

Note: if you have trouble with an axis, unplug its cable from the main controller and then 
plug it back in. Then turn the axes back on in the 

Axes

 screen.  

Homing PAN with a Non-encoded ARRIHEAD-1 or ARRIHEAD-2 

The procedure described above is slightly different for the non-encoded ARRIHEADs.  
 
 
 
 
 
 
 
 
 
•  Place a piece of tape on the rotating part of the head and another one close-by on a non-rotating 

part. Draw a line through both pieces of tape. This is your home mark.  

• Push 

the 

Axes

 tab to open the 

Axes

 screen. Select the first axis in the list, which should be 

PAN

.  

• Push 

the 

On/Home

 button once to turn the pan axis on. The axis 

State

 will change to 

?

. Push 

On/Home

 again. The current position will become the homing position.  

Содержание ARRIMOTION



































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды