ARRI ARRIMOTION, Руководство пользователя

Страница: 64 / 162

ARRIMOTION User’s Guide, 01/2004
Page 64 of 162
3.9. Rejecting Revolutions
When an axis reaches either the natural end
point or a limit set in software, the assigned
Mimic will still turn, but the motor will not move.
For example, if the ARRIHEAD is tilted all the
way down, the tilt axis cannot go any further, but
the tilt hand wheel will still rotate past that point.
The ARRIMOTION system can either remember
how many revolutions past that point a Mimic
was wound, or it can reject the extra revolutions
of the Mimic.
• Push
the Mimics tab to open the Mimics
screen. Select the axis that you want to
change (in our example the PAN axis) and
push the
Modify button.
• In the Edit Mimic: HW PAN screen, push the Reject Rev button.
• If you want the extra revolutions rejected, push Yes .