ARRI ARRIMOTION, Руководство пользователя

Страница: 49 / 162

ARRIMOTION User’s Guide, 01/2004
Page 49 of 162
Camera Roll
There are various ways to fine tune who starts the camera and how. The master switch that
overrides all other settings is the
Roll button in the Camera screen.
• Push
the Camera tab to open the Camera screen. Push the Roll button.
• If the camera will not run at all, disregarding who turns it on or off, this setting should be NO . The
ARRIMOTION system will then ignore the camera. Even if the camera is turned on manually
while a move is recorded or plays back, the ARRIMOTION system will make no attempt to
synchronize itself to the camera. The
NO setting is recommended for rehearsals.
• If the camera will run during record or play back, started by the ARRIMOTION system or
manually, this setting should be YES. In that case the ARRIMOTION system will synchronize
itself to the camera. Detail options can be set via the
Setup button in the Camera screen.
• To access the detail options, push the
Setup button in the Camera screen.
• Scroll down the list until you see the following three items:
Run While Record When On , the camera will start running each time a move is recorded or
played back.
When Off , the camera will not run when a move is recorded, but it will
run each time a move is played back.
Start Camera When On , the camera will start running each time a move is recorded or
played back.
When Off , the camera will not start running when a move is recorded or
played back. Instead, the ARRIMOTION system will expect you to start
the camera before the move. This is useful when the action begins
before the move.
Stop Camera When On , the ARRIMOTION system will stop the camera each time a
move recording or play back is stopped.