ARRI ARRIMOTION Скачать руководство пользователя страница 111 | Manualshive

Страница: 111 / 162

ARRI ARRIMOTION Скачать руководство пользователя страница 111

ARRIMOTION User’s Guide, 01/2004

Page 111 of 162

The fps Button

This button sets the frame rate in live action and part move mode. During stop and go motion it will
give information on the current status of the exposure.

The Lock Mimics Button

Locking mimics will enable the mimics and the axes will exactly follow the positions commanded by
the mimics. If the button is not selected the system can e.g. play back moves.

The Goto Start Button

Pushing this button will move the system to the start position. The start position is the begin of the
preroll (or frame one in stop motion mode).

The Goto End Button

Pushing this button will move the system to the end position. The start position is the begin of the
preroll (or the last frame one in stop motion mode).

The Play Button (available in Live Action, Part Move, and in Stop- and Go Motion Mode in
continuous mode)

Pushing play will start the replay of the move. If the system is not on the start or the stop position of
the move this button is inactive.

The Expose Button (available in Stop- and Go Motion mode with manual exposure instead of
the play button)

Pushing expose will trigger the exposure of a single frame.

The Stop Button

Pushing the stop button will decelerate the system smoothly to standstill.
The stop button is not an emergency cutout button since axes will not stop immediately.

The Record Button (available Live Action Mode)

The record button will trigger the recording of a move. In multitrack mode the button will show a
combined play/rec icon.

The Retreat Button (available in Stop- and Go Motion mode)

Pushing retreat will move the system on the move to the selected frame.

The Timeline Wheel (available in Stop- and Go Motion mode)

The system will browse through the move when rotating the primary mimic.

«
...
109
110
111
112
113
...
»

Содержание ARRIMOTION



































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды