ARRI ARRIMOTION, Руководство пользователя

Страница: 47 / 162

ARRIMOTION User’s Guide, 01/2004
Page 47 of 162
Erasing Limits
• Push the Mimics tab to open the Mimics
screen. Select the axis that you want to
change (in our example the PAN axis) and
push the
Modify button.
• In the Edit Mimic: HW PAN screen, push the
Default button.
Soft Stops
The ARRIMOTION System will stop at the limits as fast as it can. Smoother stopping can be set in
the
Axes screen.
• Push
the Axis tab to open the Axis screen.
Select the axis that you want to change (in our
example the PAN axis) and push the
Conf
button.
• In the Params for Axis (PAN) screen, push the
Param button.
• Scroll down the list until UserAcc is selected
and push the Modify button.
• The default value for user acceleration is
100%. Stops will be smoother if you set it to a
value less than 100%. Set the new value and
push
OK .
• In the Axis Params: PAN screen push the
Close button. In the Params for Axis (PAN)
screen, push the Close button.
Smoothing
The same parameter that sets soft stops (UserAcc, see Soft Stops above) also will smooth out any
irregularities, and make a pan or tilt smoother.