Arkon MAGB2 Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 54

Arkon MAGB2 Скачать руководство пользователя страница 54

MAGB2 User Guide

53

V1.7 2021-10-01

21. Appendix

21.1. CE and Conformity

The MAGB2 Electromagnetic flowmeter is manufactured conform CE requirements.

21.2. Warranty

The  warranty  conditions  are  covered  by  Arkon  Flow  Systems,  s.r.o.  Terms  &  Conditions  of  Sale  and  by
Arkon  Flow  Systems,  s.r.o  Return  Regulations  and  Warranty  Conditions.  The  Arkon  Flow  Systems,  s.r.o
Terms  &  Conditions  of  Sale  and  the  Arkon  Flow  Systems,  s.r.o  Return  Regulations  and  Warranty
Conditions  are  an  integral  part  of  the  Resellers  contract  and  of  any  Order  Confirmation.  Please  see  your
Resellers contract or www.arkon.co.uk; Support section. The Warranty sheet is part of the Packing note of
any new goods sent. For the claim or return procedure, please consult our web site www.arkon.co.uk or call
the Arkon Flow Systems, s.r.o. sales office.

21.3. Contact

Technical support:

[email protected]

Skype: support.arkon

Sales office:

[email protected]

Office hours:
8:30

– 18:00 (GMT+1)

Direct technical support:
8:00

– 17:00 (GMT+1)

«
...
52
53
54

Содержание MAGB2























































Отзывы:

Нет отзывов