Arkon MAGB2, Руководство пользователя, Страница: 33 / 54

MAGB2 User Guide 32 V1.7 2021-10-01
9=On < F1,
10=Volume
Pulse
2030 2029 Bool 0 0 1 0
Load Default
Settings R/W
2032 2031 Longint 0 0 9999 1111 Password Setup R/W
2034 2033 Longint 0 1 247 1
Modbus Slave
Address R/W
2036 2035 Longint 0 0 5 2
Modbus
BaudRate,
0=4800,
1=9600,
2=19200,
3=38400
4=57600
5=115200
2038 2037 Longint 0 0 3 3
Modbus Parity,
0=Even, 1
stopbit,
1=Odd, 1
stopbit,
2=None, 2
stopbits,
3=None, 1
stopbit R/W
2040 2039 Bool 0 0 1 0
Totalizer cycling
0= OFF,
1= ON R/W
2042 2041 Longint 0 0 5 0
Module select*
0=OFF,
1=RS485,
2=GPRS,
3=IOUT,
4=LoRa,
5=MBUS R/W
*Will be transferred to automatic function later
Datalogger Interval
– this function selects how often data is written to the datalogger.
Air Detector
–
this option allows selecting empty pipe check. Default ON. If the Air detector is active and
the pipe is empty, the unit automatically turns down the excitation to prolong battery life.
Delete Aux + Volume
–
write value different to zero for erasing the auxiliary flow totalizer.
Samples per Avg.
– the number of samples that the flowmeter will use for calculation of its displayed
average flow value. Default 3.
Frequency Output Setting - Signal
– see chapter Frequency output
Frequency Output
– Q1kHz – see chapter Frequency output
Relay
– Comparator Flow 1
- see chapter Pulse Output.
Relay
– Comparator Flow 2
- see chapter Pulse Output.
Relay
– Comparator Hysteresis 1
- see chapter Pulse Output.
Relay
– Comparator Hysteresis 2
- see chapter Pulse Output.
Relay
– Volume per Pulse
- see chapter Pulse Output.
Relay
– Pulse Width
- see chapter Pulse Output.
Relay
– Pulse Output – setting signal
- see Pulse Output.
Load default settings
–
Load default factory setting or users changing setting on function Save setting.