manualshive.com logo in svg

Arjohuntleigh citadel, Инструкция по эксплуатации, Страница: 53 / 76

Поделиться
Скачать
Arjohuntleigh citadel Скачать руководство пользователя страница 53

53

Citadel Bed Frame System

Patient Transfer from the Citadel Bed Frame System

1.  Level patient surface.
2.  Adjust height of patient surface to same level as surface to which 

patient is being transferred.

3.  Make sure caster brakes on both units are locked.
4.  Lower side rails.
5.  Transfer patient, following all applicable safety rules and institution 

protocols.

Patient Transport

1.  If necessary, place patient’s IV therapy onto IV poles that may be 

placed into sockets located on all four corners of the frame.

2.  Verify side rails are raised and locked.
3.  Unplug the power cord from the wall outlet and wrap the cord on to 

the plastic hook on the headboard.

4.  Unlock brakes.
5.  Transport patient following all applicable safety rules and institution 

protocols.

6.  Firm mattress and Transport mode can be used as assisting 

functions during patient transport if using the 

Citadel

 Patient Therapy 

System. 

7.  Plug power cord into wall outlet immediately following completion of 

patient transport.

To make sure the battery is kept fully charged and prevent 

damage to the battery, the bed should be connected to the 

electricity supply at all times during normal use.

Содержание citadel













































































Отзывы:

Нет отзывов