Arjohuntleigh citadel Скачать руководство пользователя страница 20

Страница: 20 / 76

Citadel Bed Frame System

Auxiliary Power Outlet (Optional Feature)

Do not connect any critical or life-sustaining equipment to

auxiliary outlet. These devices should be connected to hospital

outlets.
Devices connected to this outlet shall not exceed:

• 115 VAC / 7A
• 230 VAC / 4A

This outlet does not remain powered when the bed is on battery

backup.

Auxiliary power outlet is provided as a convenience for powering devices

intended to be placed at or near the foot end of the bed.

Skin IQ Family Power Cable

The cable should only be used to power the Skin IQ Family of

products.

Skin IQ

Power Cable is provided as a convience for powering

Skin IQ

. This

feature remains powered for four hours when the bed is on battery backup.

A 12 VDC power cable is located at the foot end of the bed which provides a

connection point for the

Skin IQ

of products.

Skin IQ Installation

Refer to Skin IQ Instructions for Use for detailed installation

instructions.

1. Stretch the

Skin IQ

coverlet over existing surface and use straps to

secure to existing mattress.

2. When using the

Skin IQ

on the

Citadel

mattress, the mattress comes

already equipped with straps located mid way under the mattress

exclusively for attaching the tie-down straps from the

Skin IQ

coverlet.

3. Use the 12 VDC power cable, centered at the foot end of the bed to

plug in the

Skin IQ

. Cable has a tag indicating it is for

Skin IQ

use.

Figure 7: Auxiliary power outlet and Skin IQ Family power cable

Skin IQ

connection

located behind

foot board

weldment

Auxiliary

power outlet

located on the

under side

of foot board

weldment

Содержание citadel













































































Результаты поиска

Содержание citadel

Отзывы:

Arjohuntleigh citadel, Инструкция по эксплуатации, Страница: 20 / 76

Результаты поиска

Содержание citadel

Отзывы: