Arjohuntleigh citadel Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 76

Arjohuntleigh citadel Скачать руководство пользователя страница 28

28

Citadel Bed Frame System

Head End Brake Pedals

Additional brake pedals are located at the head end of the bed. These operate in

the same way as the foot end pedals.

Figure 18: Head end brake pedal

Side Rails

The clinically-qualified person responsible should consider the

age, size and condition of the patient before allowing the use of

side rails.

Side rails are not intended to restrain patients who make a

deliberate attempt to exit the bed.

Make sure that the mattress is suitable for use with side rails -

see Mattresses on page 21.

To prevent possible entrapment, make sure the patient’s head

and limbs are clear of the side rails when adjusting the deck.

To lower the side rail:

1. Hold either side rail handle.

2. Pull the blue release lever and lower the side rail, holding the side rail

until it is completely lowered. The side rail folds down next to the deck.

Figure 19: Side rail operation

«
...
26
27
28
29
30
...
»

Содержание citadel













































































Отзывы:

Нет отзывов