Arjohuntleigh citadel Скачать руководство пользователя страница 25

Страница: 25 / 76

Citadel Bed Frame System

Drainage Bag Rails

The maximum weight that can be safely supported by each

drainage bag rail and DIN rail is 5 kg (11 lb).

Items placed on the drainage bag rails (such as patient drains

and urine bags) are included in the weighing calculation, and

can influence measurement of patient weight - see Weighing

Accuracy on page 38.

Rails (1) to support drainage bags, etc. are located below the thigh and backrest

sections on either side of the bed.

The bed may also be fitted with optional DIN accessory rails (2).

Figure 13: Drainage bag rails and DIN rail

Bed Length Adjustment

Install a suitable foam mattress extension (squab) at the foot end

when the bed is extended with a foam mattress.

Always adjust the bed frame and deck to the same length and

make sure both are latched securely in position.

Take care not to pinch your fingers when lifting the catch bar.

The length of the bed is adjustable to two set positions and an additional

transport position. These are typically used as follows:

1. Transport, for maneuvering the bed in confined spaces. No mattress

should be sized for this length as it is only to be used as a temporary

transport length, when necessary.

2. Standard length, for normal use. Sets deck length at 202 cm

(80 in).

3. Extended, to accommodate very tall patients. Sets deck length at 214

cm (84 in).

Содержание citadel













































































Результаты поиска

Содержание citadel

Отзывы:

Arjohuntleigh citadel, Инструкция по эксплуатации, Страница: 25 / 76

Результаты поиска

Содержание citadel

Отзывы: