Arjohuntleigh citadel Скачать руководство пользователя страница 5

Страница: 5 / 76

Citadel Bed Frame System

GENERAL WARNINGS

The following warnings should be considered prior to using this product:

Before using the bed, make sure that the power in rating on the

specification label is compatible with the local electricity supply.

To make sure the patient can use the bed safely, their age and

condition should be assessed by a clinically-qualified person.

The use of head down tilt (Trendelenburg) or foot down tilt

(reverse Trendelenburg) may be contraindicated for certain

medical conditions. The tilt function should only be used under

the guidance of a clinically-qualified person after assessment of

the patient’s condition.

All accessories added to the system reduce the safe working

load of the frame by the same amount.

If the power cord or plug is damaged, the complete assembly

must be replaced by authorized service personnel. Do not

remove the fitted plug, or use a rewireable plug or adapter.

Make sure the power cord is not stretched, kinked or crushed.

Do not allow the power cord to trail on the floor where it may

cause a trip hazard.

Make sure the power cord does not become entangled with

moving parts of the bed or trapped between the bed frame and

head board.

Always adjust the bed frame and deck to the same length and

make sure both are latched securely in position.

Always use a mattress of the correct size and type. Incompatible

mattresses can create hazards.

Entrapment hazards may exist when using a very soft mattress,

even if it is the correct size.

The clinically-qualified person responsible should consider the

age, size and condition of the patient before allowing the use of

side rails.

Side rails are not intended to restrain patients who make a

deliberate attempt to exit the bed.

To prevent possible entrapment, make sure the patient’s head

and limbs are clear of the side rails when adjusting the deck.

Содержание citadel













































































Результаты поиска

Содержание citadel

Отзывы:

Arjohuntleigh citadel, Инструкция по эксплуатации, Страница: 5 / 76

Результаты поиска

Содержание citadel

Отзывы: