manualshive.com logo in svg

Arjohuntleigh citadel, Инструкция по эксплуатации, Страница: 49 / 76

Поделиться
Скачать
Arjohuntleigh citadel Скачать руководство пользователя страница 49

49

Citadel Bed Frame System

PATIENT PLACEMENT

It is recommended that all chapters of this manual be reviewed prior to 

product use. Carefully read the 

Contraindications, Risks and Precautions,

 

and 

Safety Information

 sections in the 

Introduction

 chapter of this manual 

prior to placing a patient on the 

Citadel 

Bed Frame System.

Power On 

1.  Plug the power cord into a wall outlet. Verify that the electrical 

outlet can be easily accessed when disconnecting device from 

wall outlet. 

Do not use wall outlet controlled by a wall switch.
ArjoHuntleigh recommends keeping the frame plugged into 

a wall outlet when possible. 

Preparation for Patient Placement 

1.  If applicable, connect nurse call system to connectors provided 

at the head end of the bed. 

2.  Apply the brakes to all four casters.
3.  Make sure patient surface is level.
4.  Adjust the bed to a comfortable working height.
5.  Configure unit as required (add the pressure redistribution 

surface of choice, pillows, blankets, lines, IV poles, other 

equipment, accessories, etc., as necessary).

6.  Press the Zero Button to reset the weighing scale to zero. 

Scales / patient weights are for reference only. Scale readings 

should not be relied upon for medication dosage. All equipment 

on the weighed portion of the unit is included in weight displayed.

7.  Adjust the height of the patient surface to the same level as the 

surface from which the patient is being transferred.

8.  Make sure caster brakes on both units are locked.
9.  Lower side rails.

10.  Transfer patient following all applicable safety rules, institution 

protocols and patient placement instructions for the pressure 

redistribution surface used with the 

Citadel 

Bed Frame System.

11.  Raise and lock side rails on both sides of unit.

Содержание citadel













































































Отзывы:

Нет отзывов