manualshive.com logo in svg

Arjohuntleigh citadel, Инструкция по эксплуатации, Страница: 51 / 76

Поделиться
Скачать
Arjohuntleigh citadel Скачать руководство пользователя страница 51

51

Citadel Bed Frame System

NURSING CARE

It is recommended that all chapters of this manual be reviewed prior to product 

use. Carefully read the 

Contraindications

, 

Risks and Precautions

 and 

Safety Information

 sections of the 

Introduction

 chapter of this manual prior to 

performing nursing care for a patient on the 

Citadel 

Bed Frame System.

CPR

The following steps indicate how to place the bed into the CPR position.

1. 

Press and hold the CPR button. 

This will immediately flatten 

the head and knee sections and return the frame to level from 

the Trendelenburg or reverse Trendelenburg positions. If the 

bed is set to a height > 480mm (19 in), then activating the CPR 

function will also lower the bed to 480mm (19 in). The CPR 

buttons will flash on all control panels and an audible tone will 

sound. If installed, the 

Citadel

 Patient Therapy System will 

deflate the mattress and turn off.

 

2.  Lower side rails.
3.  Remove headboard, if necessary.
4.  Depending on the patient support surface in use, a crashboard 

may be needed.

5.  Begin CPR. Follow institution CPR guidelines.
6.  Reinstall headboard, if necessary.
7.  Raise and lock side rails. 
8.  If applicable, resume therapy as directed by physician.
9.  Adjust patient surface for patient comfort.

In a fault or power loss condition where the CPR button is not responding, use 

the CPR backrest release to position the patient for CPR. If installed, the 

Citadel

 

Patient Therapy System will deflate the mattress and turn off. 

Содержание citadel













































































Отзывы:

Нет отзывов