Arjohuntleigh citadel Скачать руководство пользователя страница 17

Страница: 17 / 76

Citadel Bed Frame System

Electricity Supply

If the power cord or plug is damaged, the complete assembly

must be replaced by authorized service personnel. Do not

remove the fitted plug, or use a rewireable plug or adapter.

Make sure the power cord is not stretched, kinked or crushed.

Do not allow the power cord to trail on the floor where it may

cause a trip hazard.

Make sure the power cord does not become entangled with

moving parts of the bed or trapped between the bed frame and

head board.

Unplug the power cord from the electricity supply, and store it,

before moving the bed.

Before the first use, or if the bed has been unused for more than three months,

connect the bed to the electricity supply for at least 24 hours to allow the backup

battery to recharge fully; failure to do this may reduce the life of the battery. After

charging, check that the battery is fully serviceable by carrying out a battery test

as shown on page 58.

Connect the mains plug to a suitable outlet. Make sure the plug is easily

accessible so it can be unplugged quickly in an emergency.

When the bed is connected to the electricity supply, the Power On Indicator LED

will light on the Attendant Control Panel (see page 33).

The power supply cord (1) is fitted with a plastic hook (2).

When not in use or before moving the bed, clip the hook onto the head board,

coil up the cable and place it over the hook as shown.

Figure 4: Power supply cord and potential equalization terminal

To isolate the bed from the electricity supply, unplug the mains plug from the

outlet.

Содержание citadel













































































Результаты поиска

Содержание citadel

Отзывы:

Arjohuntleigh citadel, Инструкция по эксплуатации, Страница: 17 / 76

Результаты поиска

Содержание citadel

Отзывы: