Arjohuntleigh citadel Скачать руководство пользователя страница 29

Страница: 29 / 76

Citadel Bed Frame System

To raise the side rail:

1. Hold either side rail handle. Pull the split side rail up and away from the

bed until it locks in the raised position.

2. The head end and foot end side rails operate in the same way.

Make sure the locking mechanism is securely engaged when the

side rails are raised.

Head and Foot Boards

The head and foot boards can be easily lifted off the bed for access to the

patient.

To remove, pull straight up on the handle. To replace, align the rods with the

holes in the frame and push straight down.

Figure 20: Align head / foot board with holes in frame to replace

Patient Restraints

Do not activate the turning feature on any mattress system when

patient restraints are in use.

Follow the instructions for use provided with the patient restraint

devices.

Patient restraints should be used in compliance with all

applicable federal and state regulations and in accordance with

the healthcare facility’s own policies and procedures.

Do not attach patient restraints to any part of the bed other than

detailed above. Example: side rails or head / foot boards.

Patient restraints, even when correctly used, can result in

entrapment or injury, particularly if the patient is disorientated or

restless. The decision to use patient restraints must be made

by the clinician overseeing the care of the individual patient,

following a fully documented risk assessment.

Содержание citadel













































































Результаты поиска

Содержание citadel

Отзывы:

Arjohuntleigh citadel, Инструкция по эксплуатации, Страница: 29 / 76

Результаты поиска

Содержание citadel

Отзывы: