33
Instructions For Use
EN
2.4
Ending Monitoring / Switching Off
Once monitoring is complete and the transducers and base station have been cleaned,
dock the transducers on the base station, so that they are easily located when you
want to use the system again, and the transducer batteries can be charged.
For charging the transducer batteries, the system must be connected to the mains
supply (see Section 2).
WARNING. To disconnect from the mains, the plug must be removed.
Always ensure that the plug is easily accessible.
Note: After the fetus is delivered, the monitor may pick up signals of the
umbilical cord and display a trace/numeric. To avoid misinterpretation, it is
recommended to remove the transducers from the patient and switch off the
monitor immediately after the fetus is delivered.
