13
Instructions For Use
EN
If the battery is stored inside FTS-3 for a long time without AC power
connection, it will discharge over time and the battery indicator for
"remaining capacity" will become less accurate.
High internal temperature may prevent the battery from charging. Keep
FTS-3 at room temperature and move it away from heat sources or out of
direct sunlight. The battery will resume charging when the temperature
is within range again
Only the battery supplied or recommended by the manufacturer can be
used. Use of a different battery may present a risk of fire or explosion.
Please arrange a function test periodically for the system.
Do not move the system when it is powered on and do not soak it in any
liquid.
Please check the transducer, cable and base station periodically. If the
transducers are damaged, do not use them.
The battery in the wireless transducer should be replaced by service
personnel authorised by the manufacturer.
If the transducer has been dropped or knocked, please check whether
the cover is airproof or damaged. If you have any doubt, please contact
the manufacturer or local agent.
If the battery is removed from the base station and not used for a long
time, we recommend that the battery should be charged at least once
every 6 months to prevent over discharge.
1.4.2 Cautions
The device is designed for continuous operation. Avoid liquid splashing on the
device.
Servicing should be performed only by Huntleigh Healthcare Ltd or their
appointed service agent. If you have difficulty obtaining service for FTS-3,
contact Huntleigh Healthcare Ltd.
Keep the environment clean. Avoid vibration. Keep it far from corrosive
medicine, dusty areas, high-temperature and humid environments.
Do not operate the unit if it is damp or wet because of condensation or
spills. Avoid using the equipment immediately after moving it from a cold
environment to a warm, humid location.
Do not sterilize FTS-3 or any accessory with autoclave or gas.
