27
Instructions For Use
EN
CAUTION. When the transducer indicates the power is low, replace the
transducer with a fully charged one or the monitoring will be interrupted.
CAUTION. When docking the transducer into the docking slot for charging,
check that the transducer is well placed and whether it is charging.
Battery indicator Status
Battery is fully charged.
Battery is charged but not at maximum level.
Battery level is low and requires recharging. Alarm information
will be displayed on the screen.
Battery is out of power. Charge the battery immediately.
Wipe the transducer and the charging point with a dry cloth before charging the
transducer.
Do not scratch the charging point.
The battery is installed in the transducer. If the base station is supplied by AC, the
battery will be charged automatically when it is placed in the docking slot. Keep the
transducer free of water and coupling gel during charging.
When you charge the battery, the screen will display as follows:
Full charging icon: fully charged.
Increasing charging icon: charging
No charging icon: the transducer is placed in the docking slot
incorrectly.
If the screen displays ERROR, it indicates that the transducer
is not connected well or you have placed a transducer from
another system by mistake.
The transducer has a screensaver function:
When the transducer is fully charged in the docking slot for more
than 10min (±1min ) and the base station is supplied by AC, a
small yellow full charging icon will be displayed and floating on
the screen and other icons will disappear.
When the transducer is charging in the docking slot for more
than 10min (±1min ) but the base station is not supplied by AC, a
small yellow charging icon of real battery level will be displayed
and floating on the screen and other icons will disappear.
