Arjo HUNTLEIGH FTS-3 Скачать руководство пользователя

Страница: 15 / 60

Instructions For Use

The wireless transducers are IPX8 waterproof, but the base station should be

kept non-soaked and non-condensing. The system may be condensing during

transportation in high humidity or low temperature.

The use of accessories and cables other than those specified may result in

increased electromagnetic emissions or decreased electromagnetic immunity

of the system.
This equipment generates, uses and radiates radio-frequency energy, and if it

is not installed and used in accordance with its accompanying documentation,

it may cause interference to radio communications.
When the battery is charged, used or stored, keep it away from objects or

materials with static electric charges.
The recommended charging temperature for the battery is between 0° ~ +40°

(+32 ºF ~ +104 ºF). Please do not exceed the temperature range.

1.5

Definitions and Symbols

Only

Federal (U.S.) Law restricts this device to sale by or on the order of

a physician

IPX1

Protected against vertically falling water drops

IPX8

Protected against the effects of continuous immersion in water

This product, including its accessories and consumables, is subject to the

WEEE (Waste Electrical and Electronic Equipment) regulations and should

be disposed of responsibly in accordance with local procedures.

AUTHORISED REPRESENTATIVE IN THE EUROPEAN COMMUNITY

CE Mark

Date of Manufacture

YYYY-MM

Manufacturer

Applied parts type BF

Applied parts type CF

Applied parts type CF with

defibrillator protection

Follow Instructions for Use

Refer to Instructions for Use

General Warning or

Caution.

Caution, consult Accompanying

Documents

Serial Number

P/N

Part Number

Содержание HUNTLEIGH FTS-3





























































Результаты поиска

Содержание HUNTLEIGH FTS-3

Отзывы:

Похожие инструкции для HUNTLEIGH FTS-3

Бренды по названию

Популярные бренды

Arjo HUNTLEIGH FTS-3, Инструкция по эксплуатации

Результаты поиска

Содержание HUNTLEIGH FTS-3

Отзывы:

Похожие инструкции для HUNTLEIGH FTS-3

Бренды по названию

Популярные бренды