Arctic Cat XC 450 2016, Руководство по обслуживанию

Страница: 7 / 120

6
Periodic Maintenance/
Tune-Up
Tighten all nuts, bolts, and cap screws. Make sure rivets
holding components together are tight. Replace all loose
rivets. Care must be taken that all calibrated nuts, bolts,
and cap screws are tightened to specifications.
It is advisable to lubricate certain components periodi-
cally to ensure free movement. Apply light oil to the
throttle lever and brake lever pivots.
SPECIAL TOOLS
A number of special tools must be available to the techni-
cian when performing service procedures in this section.
Refer to the current Special Tools Catalog for the appro-
priate tool description.

NOTE: When indicated for use, each special tool
will be identified by its specific name, as shown in the
chart below, and capitalized.
 NOTE: Special tools are available from the Arctic
Cat Service Department.
Air Filter
CLEANING AND INSPECTING FILTER
1. Loosen the clamp securing the front air inlet boot to
the air filter housing; then loosen the clamp securing
the rear inlet boot to the air box. Remove the inlet
pipe.
KC445A
KC446
2. Remove two reinstallable rivets from the air filter
housing mounting bracket and slide the air filter
housing rearward out of the mounting bracket.
KC447A
3. Turn and release the three locking lugs on the air fil-
ter housing and separate the air filter cover from the
housing; then remove the air filter element. Separate
the foam element from the spring.
KC143
4. Fill a wash pan larger than the element with a non-
flammable cleaning solvent; then dip the element in
the solvent and wash it. Rinse in warm water; then
press and squeeze.

NOTE: Foam Air Filter Cleaner and Foam Air Fil-
ter Oil are available from Arctic Cat.
5. Dry the element.
6. Put the element in a plastic bag; then pour in air filter
oil and work the oil into the element. Insert the form-
ing spring into the element with the closely wrapped
end of the spring toward the open end of the element.
Description p/n
Compression Tester Kit 0444-213
Oil Filter Wrench 0644-389
Tachometer 0644-275
Timing Light 0644-296
Valve Clearance Adjuster 0444-078