Arctic Cat PROWLER HDX 2015, Руководство по обслуживанию

Страница: 108 / 192

105
CF085A
9. Apply grease to the outer edges of the clutch hous-
ing; then from inside the clutch cover, install the
clutch housing into the cover using a rubber mallet.
10. Place the clutch cover/housing assembly into posi-
tion on the crankcase; then secure with the cap
screws making sure the different-lengthed cap
screws are in their proper location. Tighten to 8 ft-lb.
11. Install the windage plate and secure with new
“patch-lock” cap screws. Tighten to 7 ft-lb.
CF632A
12. Place the driven pulley assembly into position and
secure with the nut. Tighten to 162 ft-lb.
CF262
13. Slide the fixed drive face onto the clutch shaft.
14. Spread the faces of the driven pulley by threading a
cap screw into one of the bosses of the driven fixed
face; then tighten the cap screw until the V-belt drops
into the driven pulley 1/2 to 3/4 inch.
CF270A
H1-020A
15. Place the V-belt into position on the driven pulley
and over the front shaft.
PR389

NOTE: The arrows on the V-belt should point in the
direction of rotation.
16. Pinch the V-belt together near its center and slide the
spacer and movable drive face onto the driveshaft. Using
an appropriate spanner wrench, secure the drive face
with a new nut and tighten the nut to 165 ft-lb.