19
Quality for Professionals
Emptying
Start test?
Area: 25 ha
Operating hours:
0.00h
Reset?
The calibration test is started by pressing the OK button.
NOTE:
The calibration test runs for 1 minute. To truly spread the desired spread rate,
we recommend repeating the calibration test until the values (kg/min) have evened out
or the differences are minimal.
The slider is only opened when the spreading plate is rotating!
9.4
Emptying
By confirming with the OK button, you start the emptying
procedure, the spreading disc starts rotating and the
slider is automatically opened.
TIP:
Open the metering slider completely to enable faster emptying.
The emptying procedure can be stopped at any time using the arrow buttons.
9.5
Daily counter
Here, the area and operating hours that were accrued since the last reset are displayed.
Shows the spread area.
Shows the operating hours.
If you press OK here, the area and the operating hours
are set to zero.
