10
Quality for Professionals
•
There is a risk of injury due to crushing and shearing points in the area of the three-
point linkage!
•
Do not stand between the tractor and the implement when actuating the external
controls for the three-point mounting!
•
When the implement is in transport position, always ensure that the tractor three-
point linkage is sufficiently locked to the sides!
•
When driving on roads with the implement lifted, the operating lever must be locked
against lowering!
5.4
Maintenance
•
Maintenance, repair, and cleaning work as well as the elimination of malfunctions
should always be performed when the drive is switched off and the motor is at a
standstill! – Remove the ignition key! – Switch off the implement!
•
Check the nuts and bolts regularly for tight fit and retighten if necessary!
•
When performing maintenance on the lifted implement, always ensure safety through
suitable support elements!
•
When changing work tools with sharp edges, always use suitable tools and gloves!
•
Properly dispose of oils, grease and filters!
•
Always cut the power supply when working on the electrical system!
•
When performing electrical welding work on the tractor and mounted implement,
disconnect the cable on the generator and the battery!
•
Spare parts must at least comply with the technical requirements specified by the
implement manufacturer! This is ensured with original parts!
•
Do not clean the implement with water. It is recommended to clean the implement
with compressed air. While doing this, personal protective equipment should be worn
if necessary.
•
Cleaning must be carried with the implement lowered, shut down and secured to
prevent it being switched on again.
•
Working under the implement is forbidden!
•
The implements must be checked regularly by the operator (before every use) for
any fractures and cracks, leaks, chafe marks, loose bolts and connections, vibrations
and to ensure they function correctly.
