33
Quality for Professionals
15.3 7-pin signal cable
Order number:
Item no.: 00410-2-154
Connection:
12-pin plug on the control box
Cable length:
1.5 m
Scope of delivery:
1 sensor cable (Amphenol)
A connection can be established from the tractor to the control box using the 7-pin
cable. In this case, the control box receives signals from the tractor (DIN 9684
standard). As a result,
only the linkage signal (working position)
is transmitted from
the tractor to the control box. This signal opens or closes the slider automatically.
Thanks to the lifting unit signal, no manual operation on the control box is required when
turning.
If the working position is to be turned, the OK button and the ON/OFF button must be
pressed simultaneously when switching on.
The following appears on the display:
NOTE:
On some tractors, the linkage signal is not equipped as a standard.
The slider is only opened when the spreading plate is rotating!
Three-point linkage
signal Inverted!
Fig.: 19
