16
Quality for Professionals
Button Designation
Use
On/Off button
Switches the implement on or off
Arrow button down Moves the cursor down
Arrow button up
Moves the cursor up
Minus button
Reduces the speed of the spreading disc
Plus button
Increases the speed of the spreading disc
Slider closed
Close slider
Slider open
Open slider
OK button
Confirms the selection
•
Press the On/Off button.
The controls are switched on and the control lamp above the button lights up.
•
Using the plus and minus buttons, set the desired speed for the spreading disc.
•
Start driving and open the slider using the "Slider open" button.
The control lamp for "Slider open" lights up above the button.
The spreading material trickles onto the spreading disc and is distributed
accordingly depending on the speed.
•
When stopping, press on the "Slider closed" button.
The slider is closed and the control lamp for "Slider closed" lights up above the
button.
•
When leaving the field, switch off the control box using the On/Off button.
8.8
Slider sensor (available as an accessory)
For more information, see Chapter 15 Accessories.
By means of various sensors, the slider for the setting motor can be automatically
opened or closed when lifting and lowering an implement.
The sensor is connected to the 12-pin plug on the control box. As soon as the sensor is
plugged, the control box detects the sensor automatically and now uses it to close/open
the slider for the setting motor.
TIP:
The slider can still be opened or closed manually (by pressing the slider buttons).
If the working position is to be turned, the OK button and the ON/OFF button must be
pressed simultaneously when switching on.
