17
Quality for Professionals
3.5 V3.16
www.APV.at
Speed: 1,000
The following appears on the display:
NOTE:
The slider is only opened when the spreading plate is rotating!
9 Main display
Switch-on message: Is shown during the switch-on
procedure and shows the type and device version.
The software version can be very helpful in case of
service or for Customer Service.
Set motor speed in rpm
After switching on the device, you can use the "Up arrow", "Down arrow" or "OK"
buttons to move through the menu:
Each time the arrow buttons are pressed in the menu, you move one menu item up or
down.
The following menu points are available:
Using the arrow buttons, select a menu item and confirm with OK.
Here, you can use the arrow buttons again to select a submenu (if available) and
confirm with OK. In doing so, you also switch to the value setting mode.
Values can be set using the arrow buttons. Always confirm the set value with OK.
If no other settings are made, the display goes back to the main display.
Area
calculation
Calibration test
Emptying
Daily counter
Area:
Operating hours:
576.23
Operating voltage:
12.7 V
Motor1:
11.5A
Select language
Three-point linkage
signal
Inverted!
