RAIDER
2000
-
19
-
OPERATOR FOR SWING GATES
English
INSTALLATION
3.
Securing the rear mounting
3.1
After assembly, the mounting plate can be welded onto the pillar or secured to the masonry wall with Ø15mm steel
or cast-iron expansion bolts and M8 bolts
(example in
Fig.10
)
.
CAUTION: If the masonry is not strong enough or if the wall made from perforated bricks, you should use chemical
plugs with M8 bolts (see the chemical bolt instructions).
Installation of the operatoron the rear mounting
3.2
Grease the vertical pin
(Fig.11 réf.A)
and then secure the operator to the mounting with the vertical pin. Secure the pin
with two circlips
(Fig.11 réf.B)
.
Warning
!
During assembly and disassembly, handle the operator with care. Take precautions to prevent accidents to those handling
the operator or others in the surrounding area.
Fig.12
B
A
B
Fig.11
Fig.10
Two M8 two Ø15 mm bolts (NOT supplied)
Note:
The plate has adjuster slots to
help you position the plate precisely
before tightening the bolts.
