RAIDER
2000
-
14
-
OPERATOR FOR SWING GATES
English
DESCRIPTION OF THE OPERATOR
1.
Envisaged use and Field of application
1.1
The
Raider 2000
electro-mechanical operator is designed to move double wing gates or single wing gates automatically.
It should be used on residential gates only and is designed for gates which are not open/closed more than 50 times
daily.
All other uses are considered improper and therefore hazardous.
All other uses are forbidden by
Aprimatic
.
Caution
The operator does not form part of the support or safety system of the gate. The gate should
already have adequate safety and support features.
Only use the product for the permitted uses speci
fi
ed. Do not use the product for purposes other than those speci
fi
ed.
Do not tamper with or modify the product.
The product must only be installed using APRIMATIC accessories.
General features
1.2
-
Raider 2000
operator is non-reversible and will therefore keep gates with wings up to 1.8 metres long in the open or closed
position without the need for an electric locking device.
Note: For longer wings (up to a maximum of 3 metres) you should use an electric locking device.
WARNING: The motor is non-reversing. This feature prevents intrusion on any size gate.
- The emergency release will enable manual control of the gate in the event of a power failure.
The emergency release is easily accessible on the lower part of the operator. It is guaranteed to work and is easy to use
(see
par. 5.1
)
.
- Anti-crushing safety is set by adjusting the
Aprimatic
controller model
RSK24
or any similar Aprimatic controller model
fi
tted.
Technical data
Power supply
230 VAC
(+6 % ; -10 %)
Motor supply voltage
24 VDC
Frequency
50/60 Hz
Power absorption
100 W
MAX thrust force
2000 N
MAXstroke
400 mm
MAX linear speed
16 mm/sec.
Operating temperature
-20°C ÷ +65°C
Fig. 1
Information
Do NOT use other electronic units - Aprimatic S.p.A. declines
all responsibility for failure to follow these instructions.
DIMENSIONS
1.3
(see
Fig.1
)
Technical data
1.4
(see the Table)
IMPORTANT The noise level of the operator on release
from the wing and the pillar, is within the maximum limits
established by EU regulations.
55
929
890
128
55
168
168
C = 400
370
